Applying your transfers with a heat press
This is all you need.
-
Any Garment
-
Your Transfer
-
Heat Press
1. Position
Take your time and line up your artwork in the desired print area.
2. Press
Press with medium pressure press your transfer at 300°F-320°F / 160°C (this is what we find has yielded the best results) for 12-15 seconds.
3. Cool & Peel
Remove pressure and heat and let your transfer rest for a minimum of 15 seconds. After letting your transfer rest it should be cool to the touch at which point lift the transfer from one corner and gently peel back apply even pressure.
4. Final Press
Place the parchment paper included with your order on the design and press again for 15 seconds to enhance feel, increase durability and remove shine.
Applying your transfers with
a Cricut EasyPress
Yeah you can do that, and this is all you need.
-
Any Garment
-
Your Transfer
-
Cricut EasyPress
1. Position
Position the transfer in the desired location. When in doubt, consult our DTF Transfer Size & Positioning Guide to avoid any potential errors.
2. Press
Press the transfer with medium pressure at 320°F / 160°C for 15-18 seconds.
3. Cool & Peel
Remove pressure and let your transfer rest for a minimum of 15 seconds. After letting your transer rest it should be cool to the touch at which point lift the transfer from one corner and gently peel back apply even pressure.
4. Enjoy
As with any application method you'll be left with a crisp and durable desgin that will stand up to just about anything.
Applying your transfers with
an iron
Yeah you can do that, and this is all you need.
-
Any Garment
-
Your Transfer
-
Iron
1. Position
Position the transfer in the desired location. When in doubt, consult our DTF Transfer Size & Positioning Guide to avoid any potential errors.
2. Press
Shoot for a setting on your iron that corosponds with the material you are using. While applying firm and even pressure pass the iron over your transfer for at least 15-20 seconds.
3. Cool
Remove iron and let your transfer rest for a minimum of 15 seconds.
4. Peel
Confirm that your transfer is cool to the touch before attempting to remove the film. Gently peel back the film starting at one corner using even pressure.