• Rendimiento adhesivo inigualable:Experimente el pináculo de la innovación en adhesivos con nuestros paquetes de adhesivos UV DTF. Estas pegatinas están diseñadas para permanecer en su lugar, adornando computadoras portátiles, botellas de agua, ventanas de automóviles y más con una adherencia increíble.
• Durabilidad excepcional:Combinando tecnología UV DTF de vanguardia con propiedades adhesivas inmejorables, nuestros paquetes de pegatinas están diseñados para resistir el paso del tiempo y ofrecen una durabilidad inigualable para sus diseños.
• Colores vibrantes que perduran:Elaborados con tecnología de impresión UV DTF de última generación, nuestros paquetes de pegatinas muestran colores vibrantes que resisten la decoloración con el tiempo, incluso cuando se exponen a la luz solar y a condiciones climáticas adversas.
• Microondas:Disfrute de la comodidad sin compromisos. Nuestros paquetes de pegatinas no solo son vibrantes y duraderos, sino que también son aptos para microondas, lo que garantiza que sus diseños permanezcan intactos y vívidos.

We stand behind the quality of every transfer and sticker we print. If you’re not completely satisfied, we’ll reprint your order with a new or revised file at no cost to you.

Learn More

Click here to watch our UV DTF PermaStickers™ Application Instructions Tutorial Video.

To ensure your PermaStickers™ adhere correctly, follow these four simple steps.

1. Prep Your Surface and Pre-Squeegee Your UV-DTF Permasticker

Prepping the Area - When necessary, clean the surface of your item before applying the PermaSticker using either soap & water or a mixture of rubbing alcohol and water (50/50 mix). The cleaner the surface, the longer it will endure natural elements, washing, and wear and tear. Although it will adhere without this, it is recommended.

Pre-Squeegee - After cutting your sticker/decal out, place the design face down with the white side facing up. Using the padded end of the included squeegee, run over the whole design with hard pressure, back and forth 2-4 times. Additional pressure and repetitions should be applied on thin and separated design elements, such as small text.

2. Preparing your UV DTF PermaSticker for Transfer

Gently peel the two sheets apart, watching to ensure the whole design lifts off onto the top carrier sheet.  We have a saying in the Dojo - Don’t peel with your hands, peel with your EYES. Designs which contain thin lines and small separated elements, such as small text, the slower you should peel. If parts don't lift, re-squeegee from behind, and attempt to peel again from a different angle. You’ll get a feel for it with experience.

3. Placing Your UV-DTF PermaSticker Onto Your Item

First, identify the placement area on your item.

For smaller designs (4 inches & under), carefully place the design onto the placement area with two hands controlling the placement.

For larger designs (6 inches & larger), you may find it easier to place the sticker starting from one side and ending at the other. This will help control your placement, reduce bubbles underneath the design, and avoid wrinkling of the carrier sheet which could cause design elements being offset and/or design overlapping.Tip: Leave a corner of the carrier sheet unpressed to the product for easy peeling.

4. Completing the Transfer Process

After placing the design, firmly squeegee it 2-4 times. Peel slowly, watching to ensure all elements stick. Again, the lesson from the Dojo applies here - use your EYES and not just your hands. If any part of the design is not adhering, lay the carrier sheet back down, re-squeegee and try peeling from a different angle.

Orders over $75 of transfers and supplies will automatically qualify for Free Shipping. Express shipping options as fast as 1 Business Day available at checkout. For Canadian customers, orders of $99+ will qualify for Free Shipping.

Read our Shipping Policy for more information.

Refunds & Reprints

Contact us within 45 days of receiving your order to submit a request for a refund or reprint. We will reprint any order where there is a print quality or adherence issue. However, we will not issue a reprint if the uploaded file is low quality. If you'd like a refund or reprint for another reason, it must be approved by management first.

All file types accepted, vector files are always preferred, raster art should be at least 300 DPI.

Tip: If you're using Canva or Procreate, we recommend exporting your documents as PDFs

Minimum Size: While DTF handles fine details well, elements smaller than 0.02 inches (0.5mm) may not transfer properly