American Punisher (blanco y negro)

• Listo para imprimir:Evite el proceso de diseño: esta pegatina UV DTF está lista para imprimir, lo que le permitirá ahorrar tiempo y esfuerzo valiosos.
• Rendimiento adhesivo inigualable:Descubra el cenit de la tecnología de pegatinas con nuestroAdhesivos permanentes UV DTF. Diseñadas por expertos para adherirse firmemente, estas pegatinas mejoranportátiles,botellas de agua,ventanas de cocheY más con su excepcional capacidad de adherencia.
• Durabilidad excepcional:Combinando la revolucionaria tecnología UV DTF con una fuerza adhesiva incomparable, nuestros PermaStickers están diseñados para una mayor longevidad. Proporcionan una durabilidad excepcional, lo que garantiza que sus diseños duren años.
• Colores vibrantes que perduran:Utilizando métodos avanzados de impresión UV DTF, nuestros PermaStickers cuentan con colores brillantes y vivos que mantienen su vitalidad. Son resistentes a la decoloración, incluso bajo la luz solar o condiciones climáticas extremas.
• Apto para microondas y lavavajillas:Nuestros PermaStickers combinan practicidad con durabilidad. No sólo son visualmente llamativos y duraderos, sino que también son seguros para su uso en microondas y lavavajillas. Esto garantiza que sus diseños permanezcan brillantes e intactos, sin importar el uso.

We stand behind the quality of the transfers we print for you. If you are not satisfied, we will reprint with a new or revised file at no additional charge.

Learn More

Click here to watch our DTF Transfer Pressing Instructions Tutorial Video.

To ensure your DTF transfer looks professionally pressed every time, follow these four simple steps.

1. Position Your Design

Position your transfer in the desired location and make sure you are not pressing over large wrinkles. Heat-resistant tape is recommended when pressing on hats or when using a household iron to prevent the transfer from moving. You'll learn when it's needed with experience

2. Press

Press the transfer at 310°F / 155°C with medium to high pressure for 13 seconds. It is always recommended to test one piece first. Use a Silicone Upper Platen Cover & Garment Protector to protect your garment from touching the iron directly. You cannot damage the transfer by pressing with more heat, pressure, or time, however, it could scorch the garment.  

If your settings are scorching the garment, the first step would be to reduce pressure. If that doesn’t work, retain the reduced pressure and reduce the heat by 10-15°F.  With a little practice, you’ll find the right settings for each garment and material.

3. Peel Hot After a Few Seconds

With our proprietary Easy Peel Technology, you can peel hot or cool. Wait a few seconds (or more) and peel! If parts of the design are not sticking, lay it back down and press again with added pressure and heat (+15°F).  If unsuccessful, increase heat by 15°F increments until it works. Remember, the great thing about NinjaTransfers is that repeated pressing won't damage the transfer.

4. Final Press & Wash Instructions

Important: While the majority of other DTF companies advise you to press it just once, this is improper. After hundreds of wash tests, we have found that a final press is imperative to create a superior product.

After the design is transferred onto the garment, with the film peeled off, cover the design with provided parchment paper or a single layer of t-shirt material and press for ~15 seconds. By doing so, it enhances the value of your product by greatly improving the durability and softness as well as reducing the shine. For a glossy look, use a guard sheet for the second and final press instead. For best results and longevity, wash the garment inside out in cold water and dry on low heat or hang to dry. Washing it with standard settings is fine, but it lasts longer with more delicate settings.

For step-by-step pressing instructions for household irons or a Cricut EasyPress, click here.

All orders ship out the same or next business day. Orders over $75 will automatically qualify for Free Shipping. Express shipping options using Rush Delivery and our Guaranteed Delivery option UPS Next Day Air Saver® available at checkout.

Read our Shipping Policy for more information.

Refunds & Reprints

Contact us within 45 days of receiving your order to submit a request for a refund or reprint. We will reprint any order where there is a print quality or adherence issue. However, we will not issue a reprint if the uploaded file is low quality. If you'd like a refund or reprint for another reason, it must be approved by management first.