DTF 按大小转移

• 准备印刷：跳过设计过程 - 该转移已准备好进行印刷，从而节省您宝贵的时间和精力。
• 高品质印刷：清晰的细节和引人注目的色调即使在多次洗涤后仍保持鲜艳。
• 多功能应用：通过这种多功能转印改造 T 恤、手提袋、家居装饰等，让您的创造力尽情发挥。

We stand behind the quality of the transfers we print for you. If you are not satisfied, we will reprint with a new or revised file at no additional charge.

Learn More

Click here to watch our UV DTF PermaStickers™ Application Instructions Tutorial Video.

To ensure your PermaStickers™ adhere correctly, follow these four simple steps.

1. Prep Your Surface and Pre-Squeegee Your PermaSticker

Prepping the Area - Clean the surface of your item before applying the PermaSticker using either soap & water or a mixture of rubbing alcohol and water (50/50 mix). The cleaner the surface, the more permanent to natural elements and wear and tear.

Pre-Squeegee - After cutting out your PermaSticker, place the design face down with the white side facing up. Using the padded end of the included squeegee or credit card, run over it with hard pressure, back and forth 3-5 times. This forces the design onto the clear carrier sheet.

2. Separating The Clear Carrier Sheet From The White Backing

Separate the clear carrier sheet from the white backing by making a small tear. Do not tear near the design. Next, SLOWLY separate the clear carrier sheet from the white backing. We have a saying in the dojo - Don’t use your hands, use your EYES. This ensures every piece of your design is lifting onto the clear carrier sheet. If it’s not, set it back down, squeegee again, and try pulling that specific area which didn’t lift from a different side. The more thin and separated design elements there are, such as small text, the slower you should peel. The larger the design elements, the less careful you need to be. You will get a feel for it as you continue to work with our PermaStickers.

3. Placing your PermaSticker Onto Your Item

First, identify the placement area on your item. Then lay the design down starting from one side and ending at the other. This will help control your placement, reduce bubbles underneath the design, and avoid wrinkling of the carrier sheet which could cause design elements being offset and/or design overlapping. Tip: Leave an edge of the carrier sheet lifted, aka “dog-eared”, so you can easily grip it.

4. Completing The Transfer Process

After placing, use the padded end of the squeegee to run over it with hard pressure, back and forth 3-5 times. This forces adhesion to your item. Don’t squeegee over the “dog-eared” edge to retain something to grip. You are now ready to SLOWLY peel. Again, use your eyes while you peel to ensure every element of your design remains on your item. While peeling, move your grip inward to maintain a controlled peel. If all
elements do not transfer, you can lay the clear carrier sheet back down, squeegee hard again, and try pulling that specific area which didn’t lift from a different side.

All orders ship out the same or next business day. Orders over $75 will automatically qualify for Free Shipping. Express shipping options using Rush Delivery and our Guaranteed Delivery option UPS Next Day Air Saver® available at checkout.

Read our Shipping Policy for more information.

Refunds & Reprints

Contact us within 45 days of receiving your order to submit a request for a refund or reprint. We will reprint any order where there is a print quality or adherence issue. However, we will not issue a reprint if the uploaded file is low quality. If you'd like a refund or reprint for another reason, it must be approved by management first.